Important:
Because of differences in conditions (concentration, temperature, pressure etc.) and composition of chemicals / fluids the recommended colour coding green/red/blue/black are only guidlines and should not be taken as binding. For these reasons we cannot give any guarantees as to the correctness of our recommendations in individual cases.
Back

Spray-Matic 10 B

Article number: 11839201 / EAN: 7611034010083
Spray-Matic 10 B
  • Application Spray-Matic 10 B
  • Application  Spray-Matic 10 B
  • Application Spray-Matic 10 B

Robust knapsack sprayer for builders and contractors, industry and professional cleaning

  • Tank volume 10 litres
  • Pump mounted externally – for low maintenance and more protection against dirt
  • Stainless steel base – for an excellent stability
  • Brass trigger with integrated fine filter
  • Curved tube 50 cm made of stainless steel
Read more

Technical data
ApplicationWater
Impregnation
Formwork release oil / Release agents
Antirust
Dissolution of wallpaper
Mineraloil based solvent
Form of applicationLiquid
Filling capacity (Volume, l)10
Max. working pressure (bar)6
Nozzle typeFanjet nozzle TP 8002 brass
Spray patternFanjet nozzle
Nozzles materialPlastic, plastic / stainless steel
Material Device/containerPlastic
Material FittingsPlastic, stainless steel
Fitting connectorsscrew fitting
Stress classVery heavy duty
Length (mm)255
Width (mm)353
Height (mm)504
Weight (kg)4.8
Device typeBackpack sprayer
Special functionGaskets Viton
Nozzles data
Fanjet nozzle G1/4"i, TP 8002 MsFanjet nozzle G1/4"i, TP 8002 MsTechnical parametersSpray patternFanjet nozzlePressure range1 – 1 barFlow rate l/minbarDroplet size depending on pressure
Pressure (bar)12345678910
Spraying
To the nozzle
Herbicide Floodjet nozzle 1.6 mm, blueHerbicide Floodjet nozzle 1.6 mm, blueTechnical parametersSpray patternFanjet nozzlePressure range – 2 barTo the nozzle
Duro mist nozzle 0.8 mmDuro mist nozzle 0.8 mmTechnical parametersSpray patternHollow cone nozzlePressure range1 – 25 barSpray angle50°Flow rate l/minbarTo the nozzle
Duro mist nozzle 1.0 mmDuro mist nozzle 1.0 mmTechnical parametersSpray patternHollow cone nozzlePressure range1 – 25 barSpray angle60°Flow rate l/minbarTo the nozzle
Duro mist nozzle 1.3 mmDuro mist nozzle 1.3 mmTechnical parametersSpray patternHollow cone nozzlePressure range1 – 25 barSpray angle75°Flow rate l/minbarTo the nozzle
Duro mist nozzle 1.5 mmDuro mist nozzle 1.5 mmTechnical parametersSpray patternHollow cone nozzlePressure range1 – 25 barSpray angle80°Flow rate l/minbarTo the nozzle
Duro mist nozzle 1.65 mmDuro mist nozzle 1.65 mmTechnical parametersSpray patternHollow cone nozzlePressure range1 – 25 barSpray angle90°Flow rate l/minbarTo the nozzle
Adjustable nozzle 1.3 mm, G1/4“ brass niAdjustable nozzle 1.3 mm, G1/4“ brass niTechnical parametersSpray patternAdjustable nozzlePressure range1 – 25 barFlow rate l/minbarTo the nozzle
Foam nozzle G1/4“Foam nozzle G1/4“Technical parametersSpray patternPressure range – barTo the nozzle
Videos

No videos available.

Downloads

No downloads available.

Choose video or document
Post a comment

Tell us what you think about Spray-Matic 10 B!

No comments yet